(Clipped Wing Version)
This laser cut
kit self jigging builds as fast as it flies. With its 12oz wing loading
and its superior strength. the Diamond Dust performs ultra aggressive
maneuvers including 90 degree turns at full throttle. Excellent low speed
||480 sq in
||12 oz / sq ft
||2.5 -3.0 lbs
||.25 - .50 2 cycle
A great high-speed reflex tune-up aircraft.
Diamond Dust - CW KIT (10.4 MB)
Kit includes necessary hardware
(Click here for complete parts list) (20.3k)
Email your questions to
Selection = Any sport 2C engine .20 to .40 is adequate to fly
the plane well. My personal preference is rear exhaust OS.25VFDF or
Thunder Tiger .36.
- A lot
of people like to make the plane go faster and some good choices for
that are: OS.46 VFDF, MVVS-SHO Q.40 or JETT FIRE .50.
Choices = My personal preference for the elevons are the JR/4735's
and a micro on the throttle. JR/DS9411 or in an application where you
have a monster motor, use a JR/DS8611.For the throttle, the HS85BB
is a good choice or the HS81. Note on the throttle linkage, use a
plastic cleves at each end and do not crush the gromets, if you do
you will run the risk of vibration damaging the servo.
Selection = In most cases, the 4N-350AAC Flat Pack will work just
fine. If you want to fly with the sport engine and have a large fuel
tank a fun battery to run is the 4KR800AE, or a 2S Lipoly, 600ma to
1320ma with a voltage regulator.
= We only use Ultra Coat or Ora cover. It adds to the overall strength
of the airframe. In the cold, if you use other types of covering and
you develop a pin hole, you run the risk of exploding all the covering
off of the airframe.
Email us a picture of you and Your Diamond Dust for addition to our
upcoming user gallery.
BACK TO HOME